Home / Practice papers

KCSE (Form 4) Physics - Paper 1 (232/1) (Predicted Practice Paper)

This is a practice paper modelled on the national examination format. It is a prediction for practice, not the real exam. Attempt each question, then open the answer to mark yourself. Total marks: 80.

Section A

1. The diagram below shows part of a micrometer screw gauge scale when measuring the diameter of a wire. The main scale (sleeve) shows readings in millimetres. The visible main scale mark is 5.5 mm. The thimble scale has 50 divisions and the 38th division coincides with the main line. (a) State the reading on the sleeve. (1 mark) (b) Determine the diameter of the wire. (1 mark) (2 marks)

Show answer

Answer: (a) Sleeve reading = 5.5 mm (b) Thimble reading = 38 × 0.01 mm = 0.38 mm Diameter of wire = Sleeve reading + Thimble reading = 5.5 mm + 0.38 mm = 5.88 mm

(a) Sleeve reading = 5.5 mm (1 mark)
(b) Correct calculation of total reading (e.g., 5.5 + 0.38) (0.5 mark)
Correct final answer with units (5.88 mm) (0.5 mark)

2. State two disadvantages of friction. (2 marks) (2 marks)

Show answer

Answer: 1. It causes wear and tear of moving parts of machinery. 2. It produces heat, which can damage machine parts or cause energy loss. 3. It opposes motion, meaning more force/energy is required to move objects.

Any two correct disadvantages mentioned (1 mark each). Examples: wear and tear, heat production, opposition to motion, wastage of energy.

3. A student observes that the pressure at the bottom of a swimming pool increases when more water is added, even if the temperature remains constant. (a) Identify the factor that causes this increase in pressure. (1 mark) (b) State another factor that affects pressure in liquids. (1 mark) (2 marks)

Show answer

Answer: (a) The factor is depth (or height of the liquid column). (b) Another factor is the density of the liquid (or acceleration due to gravity).

(a) Depth (or height) (1 mark)
(b) Density of the liquid OR acceleration due to gravity (g) (1 mark)

4. Explain why gaps are left between railway lines. (2 marks) (2 marks)

Show answer

Answer: Gaps are left between railway lines to allow for thermal expansion during hot weather. Without these gaps, the rails would expand, buckle, and deform, potentially causing train derailments.

To allow for thermal expansion during hot weather (1 mark).
To prevent buckling/deformation/derailment (1 mark).

5. State two properties of magnetic field lines. (2 marks) (2 marks)

Show answer

Answer: 1. They originate from the North pole and end at the South pole outside the magnet. 2. They never intersect or cross each other. 3. They are closer together where the magnetic field is stronger and farther apart where it is weaker. 4. They form closed loops.

Any two correct properties (1 mark each). Examples: originate N, end S; never intersect; closer where stronger; form closed loops.

6. A 12 V battery is connected across a resistor. If a current of 0.5 A flows through the resistor, calculate the resistance of the resistor. (2 marks) (2 marks)

Show answer

Answer: Using Ohm's Law, V = IR Where V = 12 V, I = 0.5 A, R = ? Rearranging, R = V / I R = 12 V / 0.5 A R = 24 Ω

Formula (V=IR or R=V/I) (0.5 mark)
Substitution (12/0.5) (0.5 mark)
Correct answer with unit (24 Ω) (1 mark)

7. A ship sends out a sound wave and receives an echo from the seabed after 0.8 seconds. If the speed of sound in water is 1500 m/s, calculate the depth of the seabed. (3 marks) (3 marks)

Show answer

Answer: Distance = Speed × Time The time taken for the sound to travel to the seabed and back is 0.8 s. Therefore, time to reach the seabed (one way) = 0.8 s / 2 = 0.4 s Depth = Speed × one-way time Depth = 1500 m/s × 0.4 s Depth = 600 m

Correct identification of one-way time (t/2 = 0.4 s) (1 mark)
Formula (Distance = Speed × Time) (0.5 mark)
Substitution (1500 × 0.4) (0.5 mark)
Correct answer with unit (600 m) (1 mark)

8. State two conditions necessary for total internal reflection to occur. (2 marks) (2 marks)

Show answer

Answer: 1. Light must travel from a denser medium to a less dense medium. 2. The angle of incidence in the denser medium must be greater than the critical angle.

Light travels from a denser to a less dense medium (1 mark).
Angle of incidence must be greater than the critical angle (1 mark).

9. Describe the energy transformation that occurs when a ball is thrown vertically upwards and then falls back to the ground. (2 marks) (2 marks)

Show answer

Answer: When thrown upwards, kinetic energy is converted to potential energy. At its maximum height, it has maximum potential energy and minimum kinetic energy. As it falls back down, potential energy is converted back into kinetic energy.

Kinetic energy to potential energy (upwards journey) (1 mark).
Potential energy to kinetic energy (downwards journey) (1 mark).
(Accept mention of maximum PE at peak, maximum KE just before hitting ground).

10. Identify the class of lever represented by a wheelbarrow. (1 mark) Justify your answer. (1 mark) (2 marks)

Show answer

Answer: Class: Second class lever. Justification: In a wheelbarrow, the load is between the fulcrum (wheel) and the effort (handles).

Identifies as Second Class Lever (1 mark).
Correct justification: Load is between fulcrum and effort (1 mark).

11. State one similarity and one difference between alpha (α) particles and beta (β) particles. (2 marks) (2 marks)

Show answer

Answer: Similarity: Both are deflected by electric and magnetic fields (since both are charged particles). Difference: Alpha particles are positively charged and have a larger mass, while beta particles are negatively charged and have a much smaller mass. (Or: Alpha particles have less penetrating power than beta particles. Or: Alpha particles are helium nuclei, beta particles are electrons).

One correct similarity (e.g., both deflected by E/M fields, both ionise) (1 mark).
One correct difference (e.g., charge, mass, penetrating power, nature) (1 mark).

12. What is the function of the time base generator in a Cathode Ray Oscilloscope (CRO)? (1 mark) What would be observed on the screen if the time base is switched off? (1 mark) (2 marks)

Show answer

Answer: Function of time base generator: It produces a saw-tooth voltage that sweeps the electron beam horizontally across the screen at a constant speed, allowing the signal to be displayed against time. Observation if time base is off: A vertical line (or a dot if the input signal is DC) would be observed on the screen.

Function of time base: Sweeps the electron beam horizontally/produces a saw-tooth voltage (1 mark).
Observation if off: A vertical line (or a dot) (1 mark).

Section B

13. (a) Define pressure and state its SI unit. (2 marks) (b) Describe how a siphon works, illustrating with a labelled diagram. (4 marks) (c) A U-tube manometer contains water and is connected to a gas supply. The difference in the water levels is 15 cm. If the atmospheric pressure is $1.0 imes 10^5$ Pa and the density of water is $1000 \text{ kg/m}^3$, determine: (i) The pressure due to the water column. (2 marks) (ii) The absolute pressure of the gas supply. (Take $g = 10 \text{ N/kg}$). (3 marks) (d) State one application of pressure in fluids. (1 mark) (12 marks)

Show answer

Answer: (a) Pressure is defined as force acting normally per unit area. Its SI unit is Pascal (Pa) or Newtons per square metre (N/m²). (b) Description of siphon: A siphon is a tube bent into an inverted U-shape, used to transfer liquid from a higher level to a lower level over an obstruction without pumps. It works because the pressure at the liquid surface in the higher reservoir is atmospheric pressure, and the pressure at the liquid surface in the lower reservoir is also atmospheric pressure. As liquid flows down the longer arm, the weight of the liquid column creates a lower pressure at the bend, drawing more liquid up the shorter arm due to the higher atmospheric pressure at the surface of the upper reservoir. The flow continues as long as the outlet is below the inlet and the tube remains full of liquid. Diagram Description: A diagram showing a U-shaped tube with one end immersed in a liquid in a higher container and the other end immersed in a liquid in a lower container. The liquid level in the higher container should be above the bend of the U-tube, and the liquid level in the lower container should be below the bend. Arrows should indicate the direction of flow from the higher to the lower container. Key labels include: Higher reservoir, Lower reservoir, Siphon tube, Liquid surface (upper), Liquid surface (lower), Atmospheric pressure (at both surfaces), Direction of flow. (c) (i) Pressure due to the water column, $P_h = \rho gh$ Given: $\rho = 1000 \text{ kg/m}^3$, $g = 10 \text{ N/kg}$, $h = 15 \text{ cm} = 0.15 \text{ m}$ $P_h = 1000 \text{ kg/m}^3 \times 10 \text{ N/kg} \times 0.15 \text{ m}$ $P_h = 1500 \text{ Pa}$ (ii) The absolute pressure of the gas supply, $P_{gas} = P_{atm} + P_h$ Given: $P_{atm} = 1.0 \times 10^5 \text{ Pa}$, $P_h = 1500 \text{ Pa}$ $P_{gas} = 100000 \text{ Pa} + 1500 \text{ Pa}$ $P_{gas} = 101500 \text{ Pa}$ or $1.015 \times 10^5 \text{ Pa}$ (d) One application of pressure in fluids is in hydraulic brakes/jacks/lifts OR in artesian wells OR in medical drips/syringes OR operation of a suction pump/water pump.

(a) Definition of pressure (force per unit area) [1 mark]
SI unit (Pascal or N/m²) [1 mark]
(b) Description of how a siphon works [1 mark]
Correctly drawn U-tube diagram [1 mark]
Correct labels (e.g., reservoirs, siphon tube, liquid levels, atmospheric pressure, flow direction) [2 marks]
(c) (i) Formula $P_h = \rho gh$ [1 mark]
Correct substitution and answer (1500 Pa) [1 mark]
(ii) Formula $P_{gas} = P_{atm} + P_h$ [1 mark]
Correct substitution [1 mark]
Correct final answer ($101500 \text{ Pa}$ or $1.015 \times 10^5 \text{ Pa}$) [1 mark]
(d) Any one correct application (e.g., hydraulic systems, artesian wells, syringes) [1 mark]

14. (a) Distinguish between specific heat capacity and specific latent heat of fusion. (2 marks) (b) An electric heater rated 500 W is used to melt 1.5 kg of ice at 0°C. (i) Calculate the time taken to completely melt the ice. (Specific latent heat of fusion of ice = 334,000 J/kg). (3 marks) (ii) If the melted ice (water at 0°C) is then heated to 40°C, calculate the additional energy required. (Specific heat capacity of water = 4200 J/kg°C). (3 marks) (iii) State one factor that affects the rate of evaporation of a liquid. (1 mark) (c) Explain why cooking is faster in a pressure cooker. (2 marks) (11 marks)

Show answer

Answer: (a) Specific heat capacity is the amount of heat energy required to raise the temperature of 1 kg of a substance by 1°C (or 1 K). Specific latent heat of fusion is the amount of heat energy required to change 1 kg of a substance from solid to liquid state at its melting point without a change in temperature. (b) (i) Energy required to melt ice, $Q = mL_f$ Given: $m = 1.5 \text{ kg}$, $L_f = 334,000 \text{ J/kg}$ $Q = 1.5 \text{ kg} \times 334,000 \text{ J/kg}$ $Q = 501,000 \text{ J}$ Power, $P = \frac{Q}{t} \implies t = \frac{Q}{P}$ Given: $P = 500 \text{ W}$ $t = \frac{501,000 \text{ J}}{500 \text{ W}}$ $t = 1002 \text{ seconds}$ (ii) Energy required to heat water, $Q = mc\Delta T$ Given: $m = 1.5 \text{ kg}$, $c = 4200 \text{ J/kg°C}$, $\Delta T = 40°C - 0°C = 40°C$ $Q = 1.5 \text{ kg} \times 4200 \text{ J/kg°C} \times 40°C$ $Q = 252,000 \text{ J}$ (iii) Factors affecting the rate of evaporation: Temperature of the liquid, surface area exposed, nature of the liquid, humidity of the surroundings, presence of draughts/wind. (c) In a pressure cooker, the steam inside is trapped, causing the pressure to increase. This increased pressure raises the boiling point of water above 100°C. With the water boiling at a higher temperature, food cooks faster because it is exposed to higher temperatures for longer periods.

(a) Correct distinction for specific heat capacity [1 mark]
Correct distinction for specific latent heat of fusion [1 mark]
(b) (i) Formula $Q = mL_f$ [1 mark]
Correct calculation of Q (501,000 J) [1 mark]
Correct calculation of time (1002 s) [1 mark]
(ii) Formula $Q = mc\Delta T$ [1 mark]
Correct substitution [1 mark]
Correct final answer (252,000 J) [1 mark]
(iii) Any one correct factor (e.g., temperature, surface area, draught) [1 mark]
(c) Explanation that pressure increases (due to trapped steam) [1 mark]
Explanation that increased pressure raises the boiling point of water [1 mark]

15. (a) State Ohm's Law. (1 mark) (b) A circuit consists of three resistors: 6 Ω, 4 Ω, and 12 Ω. (i) Determine the total resistance when they are connected in series. (1 mark) (ii) Determine the total resistance when they are connected in parallel. (3 marks) (c) The resistors in b(ii) are connected to a 12 V power supply. (i) Calculate the total current flowing from the supply. (2 marks) (ii) Determine the power dissipated in the 4 Ω resistor. (4 marks) (11 marks)

Show answer

Answer: (a) Ohm's Law states that the current flowing through a conductor is directly proportional to the potential difference across its ends, provided temperature and other physical conditions remain constant. (b) (i) For resistors in series, $R_{total} = R_1 + R_2 + R_3$ $R_{total} = 6 \Omega + 4 \Omega + 12 \Omega$ $R_{total} = 22 \Omega$ (ii) For resistors in parallel, $\frac{1}{R_{total}} = \frac{1}{R_1} + \frac{1}{R_2} + \frac{1}{R_3}$ $\frac{1}{R_{total}} = \frac{1}{6} + \frac{1}{4} + \frac{1}{12}$ $\frac{1}{R_{total}} = \frac{2}{12} + \frac{3}{12} + \frac{1}{12}$ $\frac{1}{R_{total}} = \frac{6}{12} = \frac{1}{2}$ $R_{total} = 2 \Omega$ (c) (i) Using Ohm's Law, $V = IR_{total} \implies I = \frac{V}{R_{total}}$ Given: $V = 12 \text{ V}$, $R_{total} = 2 \Omega$ (from b(ii)) $I = \frac{12 \text{ V}}{2 \Omega}$ $I = 6 \text{ A}$ (ii) For parallel resistors, the voltage across each resistor is the same as the supply voltage. So, the voltage across the 4 Ω resistor, $V_{4\Omega} = 12 \text{ V}$. Power dissipated, $P = \frac{V^2}{R}$ $P = \frac{(12 \text{ V})^2}{4 \Omega}$ $P = \frac{144 \text{ V}^2}{4 \Omega}$ $P = 36 \text{ W}$ Alternatively, calculate current through 4 Ω resistor first: $I_{4\Omega} = \frac{V}{R_{4\Omega}} = \frac{12 \text{ V}}{4 \Omega} = 3 \text{ A}$ Then, $P = I_{4\Omega}^2 R_{4\Omega} = (3 \text{ A})^2 \times 4 \Omega = 9 \times 4 = 36 \text{ W}$ Or, $P = V I_{4\Omega} = 12 \text{ V} \times 3 \text{ A} = 36 \text{ W}$

(a) Correct statement of Ohm's Law [1 mark]
(b) (i) Correct formula for series resistance (implied by sum) [0 mark]
Correct sum and answer (22 Ω) [1 mark]
(ii) Correct formula for parallel resistance [1 mark]
Correct sum of reciprocals (6/12 or 1/2) [1 mark]
Correct final answer (2 Ω) [1 mark]
(c) (i) Correct formula for current ($I=V/R$) [1 mark]
Correct substitution and answer (6 A) [1 mark]
(ii) Recognition that voltage across parallel resistors is same as supply voltage (12V) [1 mark]
Correct formula for power (e.g., $P = V^2/R$) [1 mark]
Correct substitution [1 mark]
Correct final answer (36 W) [1 mark]
(If alternative method used, award marks for corresponding steps: Current through resistor [1], Power formula [1], Substitution [1], Answer [1])

16. (a) State two conditions necessary for total internal reflection to occur. (2 marks) (b) A student observes a fish in a pond. (i) Draw a ray diagram to show the apparent position of the fish relative to its actual position. (3 marks) (ii) Explain why the fish appears shallower than it actually is. (2 marks) (c) An object is placed 20 cm from a converging lens of focal length 15 cm. (i) Calculate the image distance. (3 marks) (ii) State two characteristics of the image formed. (1 mark) (11 marks)

Show answer

Answer: (a) Conditions for total internal reflection: 1. Light must travel from a denser medium to a less dense medium. 2. The angle of incidence in the denser medium must be greater than the critical angle. (b) (i) Diagram Description: Draw a horizontal line representing the water surface. Below the surface, mark a point 'F' as the actual position of the fish. From 'F', draw two divergent rays travelling upwards towards the water surface. At the water surface, show both rays refracting away from the normal as they pass from water (denser) to air (less dense). Extend the refracted rays backwards until they appear to meet at a point 'F'' above the actual position 'F'. 'F'' represents the apparent position of the fish. Draw normals at the points of incidence on the surface. Label 'F', 'F'' and indicate the eye of the observer above the water. (ii) Explanation: Light rays from the fish travel from water (denser medium) into air (less dense medium). Upon entering the air, the rays bend away from the normal due to refraction. When these refracted rays enter the observer's eye, the brain traces them back in straight lines, making the fish appear to be at a shallower position (F') than its actual depth (F). (c) (i) Using the lens formula: $\frac{1}{f} = \frac{1}{u} + \frac{1}{v}$ Given: $f = +15 \text{ cm}$ (converging lens), $u = +20 \text{ cm}$ $\frac{1}{15} = \frac{1}{20} + \frac{1}{v}$ $\frac{1}{v} = \frac{1}{15} - \frac{1}{20}$ $\frac{1}{v} = \frac{4}{60} - \frac{3}{60}$ $\frac{1}{v} = \frac{1}{60}$ $v = 60 \text{ cm}$ (ii) Characteristics of the image formed: 1. Real (since v is positive) 2. Inverted 3. Magnified (since $v > u$)

(a) Condition 1: Light travels from denser to less dense medium [1 mark]
Condition 2: Angle of incidence > critical angle [1 mark]
(b) (i) Correctly drawn diagram showing actual and apparent positions [1 mark]
Correct refraction (rays bending away from normal) [1 mark]
Correct extension of rays to form apparent image [1 mark]
(ii) Explanation of light rays travelling from denser to less dense medium and bending away from normal [1 mark]
Explanation that brain traces back rays causing apparent shallower position [1 mark]
(c) (i) Correct lens formula [1 mark]
Correct substitution [1 mark]
Correct final answer (v = 60 cm) [1 mark]
(ii) Any two correct characteristics (Real, Inverted, Magnified) [1 mark for both; 0.5 for one is acceptable]

17. (a) State Faraday's law of electromagnetic induction. (1 mark) (b) Describe two ways of increasing the magnitude of the induced e.m.f. in a coil moving in a magnetic field. (2 marks) (c) Distinguish between direct current (DC) and alternating current (AC). (2 marks) (d) A step-down transformer has 2000 turns in its primary coil and 200 turns in its secondary coil. If the primary voltage is 240 V AC, calculate: (i) The secondary voltage. (3 marks) (ii) The efficiency of the transformer if the primary current is 0.5 A and the secondary current is 4.5 A. (2 marks) (10 marks)

Show answer

Answer: (a) Faraday's law of electromagnetic induction states that the magnitude of the induced electromotive force (e.m.f.) is directly proportional to the rate of change of magnetic flux linkage. (b) Two ways of increasing the magnitude of induced e.m.f.: 1. Increase the strength of the magnetic field. 2. Increase the number of turns in the coil. 3. Increase the speed at which the coil moves (rate of cutting magnetic flux lines). 4. Increase the area of the coil. (c) Direct Current (DC) is an electric current that flows in only one direction, maintaining a constant polarity. Alternating Current (AC) is an electric current that periodically reverses its direction and continuously changes its magnitude with time. (d) (i) Using the transformer equation: $\frac{V_p}{V_s} = \frac{N_p}{N_s}$ Given: $N_p = 2000$, $N_s = 200$, $V_p = 240 \text{ V}$ $\frac{240}{V_s} = \frac{2000}{200}$ $\frac{240}{V_s} = 10$ $V_s = \frac{240}{10}$ $V_s = 24 \text{ V}$ (ii) Efficiency, $\eta = \frac{P_{out}}{P_{in}} \times 100\%$ $P_{in} = V_p I_p = 240 \text{ V} \times 0.5 \text{ A} = 120 \text{ W}$ $P_{out} = V_s I_s = 24 \text{ V} \times 4.5 \text{ A} = 108 \text{ W}$ $\eta = \frac{108 \text{ W}}{120 \text{ W}} \times 100\%$ $\eta = 0.9 \times 100\%$ $\eta = 90\%$

(a) Correct statement of Faraday's Law [1 mark]
(b) Any two correct ways (e.g., increase magnetic field strength, increase number of turns, increase speed) [2 x 1 mark = 2 marks]
(c) Correct distinction for DC (current flows in one direction) [1 mark]
Correct distinction for AC (current reverses direction periodically) [1 mark]
(d) (i) Correct transformer formula [1 mark]
Correct substitution [1 mark]
Correct final answer (24 V) [1 mark]
(ii) Correct formula for efficiency [1 mark]
Correct calculation of $P_{in}$ and $P_{out}$ (120W, 108W) [1 mark]
Correct final answer (90%) [1 mark]

Practise online. Do this paper as a timed quiz with automatic marking on the interactive version, or read our revision guides.