Home / Practice papers

KCSE (Form 4) Chemistry - Paper 1 (233/1) (Predicted Practice Paper)

This is a practice paper modelled on the national examination format. It is a prediction for practice, not the real exam. Attempt each question, then open the answer to mark yourself. Total marks: 80.

All questions compulsory

1. State two safety precautions that should be observed when handling concentrated acids in the laboratory. (2 marks) (2 marks)

Show answer

Answer: 1. Always wear protective gear such as a lab coat and safety goggles to protect skin and eyes from splashes. 2. Work in a fume cupboard when handling concentrated acids to avoid inhaling corrosive fumes. 3. When diluting concentrated acids, always add the acid slowly to water with constant stirring, never add water to acid, to prevent vigorous exothermic reactions and splashing. (Any two)

Wear protective gear (goggles/lab coat). (1 mark)
Use a fume cupboard / dilute acid to water slowly. (1 mark)

2. (a) Explain why solids have a definite shape and volume. (2 marks) (b) Name the process by which solids change directly into gases without forming a liquid. (1 mark) (3 marks)

Show answer

Answer: (a) In solids, particles are closely packed in fixed positions and are held together by strong intermolecular forces of attraction. They can only vibrate about their mean positions, which gives solids a definite shape and volume. (b) Sublimation.

(a) Particles are closely packed in fixed positions. (1 mark)
Held by strong forces of attraction / particles only vibrate about mean positions. (1 mark)
(b) Sublimation. (1 mark)

3. Describe how you would separate a mixture of iodine and potassium chloride. (3 marks) (3 marks)

Show answer

Answer: Gently heat the mixture in a beaker covered with a watch glass (or a cold surface). Iodine will sublime (turn directly into vapour) and then deposit as solid crystals on the cold surface. Potassium chloride, which has a high melting point and does not sublime, will remain in the beaker.

Heat the mixture gently. (1 mark)
Iodine sublimes/turns to vapour and solidifies on a cold surface. (1 mark)
Potassium chloride remains in the beaker. (1 mark)

4. An element X has atomic number 17 and mass number 35. (a) Write the electron configuration of X. (1 mark) (b) State the number of neutrons in an atom of X. (1 mark) (c) State the period and group to which element X belongs. (1 mark) (3 marks)

Show answer

Answer: (a) 2.8.7 (b) Number of neutrons = Mass number - Atomic number = 35 - 17 = 18. (c) Period 3, Group VII (or Group 17).

(a) 2.8.7 (1 mark)
(b) 18 (1 mark)
(c) Period 3 (0.5 mark), Group VII/17 (0.5 mark)

5. Draw a dot (•) and cross (x) diagram to show the bonding in a molecule of carbon (IV) oxide. (Atomic numbers: C=6, O=8) (4 marks) (4 marks)

Show answer

Answer: The diagram should show: - Carbon atom in the centre with two oxygen atoms bonded to it. - Each oxygen atom has 6 valence electrons (2 lone pairs and 2 electrons for bonding). - Carbon atom has 4 valence electrons (all used for bonding). - Two double covalent bonds, one between carbon and each oxygen atom. - Each double bond consists of 2 electrons from carbon and 2 electrons from oxygen. - Each oxygen atom should have two lone pairs of electrons (4 non-bonding electrons). Visual representation description: An Oxygen atom (O) with two lone pairs of electrons (e.g., four 'x's) and two bonding electrons (e.g., two 'x's) is double bonded to a Carbon atom (C). The Carbon atom shares four of its electrons (e.g., four '•'s), two with the first oxygen and two with the second. The second Oxygen atom is also double bonded to the Carbon atom, similarly showing two lone pairs (e.g., four 'x's) and two bonding electrons (e.g., two 'x's). The shared electrons in each double bond will be two '•'s and two 'x's.

Correct valence electrons shown for C (4) and O (6). (1 mark)
Two double covalent bonds shown between C and O atoms. (1 mark)
Correct number of shared electrons in each bond (4 electrons per double bond). (1 mark)
Correct number of lone pair electrons on each oxygen atom (2 lone pairs). (1 mark)

6. The first three elements in Group I of the periodic table are Lithium, Sodium and Potassium. (a) State how their reactivity changes down the group. (1 mark) (b) Explain your answer in (a). (2 marks) (3 marks)

Show answer

Answer: (a) Reactivity increases down the group. (b) As you go down Group I, the atomic radius increases due to the addition of more electron shells. The outermost electron is further from the positively charged nucleus and experiences increased shielding from the inner electron shells. This reduces the effective nuclear attraction on the valence electron, making it easier to lose, and thus increases the element's reactivity.

(a) Reactivity increases. (1 mark)
(b) Atomic radius increases / more electron shells. (1 mark)
Outermost electron is further from nucleus / weaker nuclear attraction for valence electron / easier to lose valence electron. (1 mark)

7. When magnesium ribbon is burned in air, a white powder is formed. (a) Name the white powder formed. (1 mark) (b) Write a balanced chemical equation for the reaction. (1 mark) (2 marks)

Show answer

Answer: (a) Magnesium oxide. (b) 2Mg(s) + O₂(g) → 2MgO(s)

(a) Magnesium oxide. (1 mark)
(b) Correct reactants and products (0.5 mark), correctly balanced (0.5 mark).

8. Calculate the number of moles in 8.4 g of sodium hydrogencarbonate (NaHCO₃). (Na=23, H=1, C=12, O=16) (3 marks) (3 marks)

Show answer

Answer: Molar mass of NaHCO₃ = Ar(Na) + Ar(H) + Ar(C) + 3 × Ar(O) = 23 + 1 + 12 + (3 × 16) = 23 + 1 + 12 + 48 = 84 g/mol. Number of moles = Mass / Molar mass Number of moles = 8.4 g / 84 g/mol Number of moles = 0.1 moles.

Correct calculation of Molar Mass of NaHCO₃ (84 g/mol). (1 mark)
Correct formula for moles (moles = mass/M_r). (1 mark)
Correct final answer with units (0.1 moles). (1 mark)

9. Explain why dilute hydrochloric acid conducts electricity while solid sodium chloride does not. (2 marks) (2 marks)

Show answer

Answer: Dilute hydrochloric acid contains mobile ions (H₃O⁺ or H⁺ and Cl⁻) that are free to move and carry electric charge. In contrast, solid sodium chloride consists of ions (Na⁺ and Cl⁻) held in fixed positions within a crystal lattice; these ions are not free to move and therefore cannot conduct electricity.

Dilute hydrochloric acid has mobile ions (H⁺/H₃O⁺ and Cl⁻). (1 mark)
Solid sodium chloride has ions in fixed positions/immobile ions. (1 mark)

10. Describe how to prepare a pure sample of lead (II) sulphate from lead (II) nitrate solution. (3 marks) (3 marks)

Show answer

Answer: Lead (II) sulphate is an insoluble salt. To prepare it: 1. Add a solution containing sulphate ions (e.g., dilute sulphuric acid or sodium sulphate solution) to the lead (II) nitrate solution. 2. A white precipitate of lead (II) sulphate will form. 3. Filter the mixture to separate the precipitate from the solution. 4. Wash the precipitate with distilled water to remove any soluble impurities. 5. Dry the lead (II) sulphate precipitate between filter papers or in a desiccator/oven.

Add dilute sulphuric acid/soluble sulphate solution to lead (II) nitrate solution. (1 mark)
Filter the precipitate. (0.5 mark)
Wash the precipitate with distilled water. (0.5 mark)
Dry the precipitate. (1 mark)

11. State two reasons why alkanes are generally unreactive. (2 marks) (2 marks)

Show answer

Answer: 1. Alkanes contain only strong carbon-carbon (C-C) single bonds and strong carbon-hydrogen (C-H) single bonds, which require a lot of energy to break. 2. These bonds are largely non-polar or only slightly polar, making them less susceptible to attack by nucleophiles or electrophiles. 3. They are saturated compounds, meaning all carbon atoms are bonded by single bonds, with no double or triple bonds to undergo addition reactions. (Any two)

They have strong C-C and C-H single bonds. (1 mark)
These bonds are non-polar/slightly polar / They are saturated compounds. (1 mark)

12. Propene reacts with bromine water. (a) State the observation made. (1 mark) (b) Write the structural formula of the product formed. (2 marks) (3 marks)

Show answer

Answer: (a) The reddish-brown (or orange-brown) colour of bromine water disappears/is decolorized. (b) CH₃-CHBr-CH₂Br (1,2-dibromopropane)

(a) Reddish-brown/orange-brown colour disappears/decolorizes. (1 mark)
(b) Correct structural formula of 1,2-dibromopropane (e.g., showing C-C, C-H, C-Br bonds, or condensed formula). (2 marks)

13. Electrolysis of molten lead (II) bromide is carried out using inert electrodes. (a) State the observations at the anode and cathode. (2 marks) (b) Write the half-equations for the reactions occurring at the anode and cathode. (2 marks) (4 marks)

Show answer

Answer: (a) Anode: A reddish-brown gas (bromine vapour) is produced. Cathode: A silvery-grey molten liquid (lead metal) is deposited. (b) Anode (oxidation): 2Br⁻(l) → Br₂(g) + 2e⁻ Cathode (reduction): Pb²⁺(l) + 2e⁻ → Pb(l)

(a) Anode: Reddish-brown gas produced. (1 mark)
Cathode: Silvery-grey molten liquid/solid deposited. (1 mark)
(b) Anode half-equation: 2Br⁻(l) → Br₂(g) + 2e⁻. (1 mark)
Cathode half-equation: Pb²⁺(l) + 2e⁻ → Pb(l). (1 mark)

14. Ammonia gas reacts with hydrogen chloride gas to form a white solid. (a) Name the white solid formed. (1 mark) (b) Write a balanced chemical equation for the reaction. (1 mark) (c) State the type of bond formed between ammonia and hydrogen chloride. (1 mark) (3 marks)

Show answer

Answer: (a) Ammonium chloride. (b) NH₃(g) + HCl(g) → NH₄Cl(s) (c) Dative covalent bond (or co-ordinate bond).

(a) Ammonium chloride. (1 mark)
(b) NH₃(g) + HCl(g) → NH₄Cl(s) (1 mark)
(c) Dative (covalent) bond / Co-ordinate bond. (1 mark)

15. In the Contact process for the manufacture of sulphuric acid, sulphur (IV) oxide is converted to sulphur (VI) oxide. (a) Write a balanced chemical equation for this reaction. (1 mark) (b) State the catalyst used in this reaction. (1 mark) (c) State the optimum temperature for this reaction. (1 mark) (3 marks)

Show answer

Answer: (a) 2SO₂(g) + O₂(g) ⇌ 2SO₃(g) (b) Vanadium (V) oxide (V₂O₅). (c) 450 °C (or a range of 400-500 °C).

(a) 2SO₂(g) + O₂(g) ⇌ 2SO₃(g). (1 mark)
(b) Vanadium (V) oxide (V₂O₅). (1 mark)
(c) 450 °C (or 400-500 °C). (1 mark)

16. Chlorine gas is bubbled through aqueous potassium iodide solution. (a) State the observation made. (1 mark) (b) Write an ionic equation for the reaction that occurs. (1 mark) (2 marks)

Show answer

Answer: (a) The colourless potassium iodide solution turns brown (or yellow-brown). (b) Cl₂(g) + 2I⁻(aq) → 2Cl⁻(aq) + I₂(aq)

(a) Colourless solution turns brown/yellow-brown. (1 mark)
(b) Cl₂(g) + 2I⁻(aq) → 2Cl⁻(aq) + I₂(aq). (1 mark)

17. Ethanol can be manufactured by two main methods: fermentation and hydration of ethene. (a) Give one raw material used in the fermentation process. (1 mark) (b) Write an equation for the hydration of ethene. (1 mark) (c) State one condition necessary for the hydration of ethene. (1 mark) (3 marks)

Show answer

Answer: (a) Glucose / Sucrose / Starch / Molasses / Fruits / Maize / Sugarcane. (Any one) (b) CH₂=CH₂(g) + H₂O(g) → CH₃CH₂OH(g) (c) High temperature (e.g., 300°C) / High pressure (e.g., 60-70 atm) / Phosphoric acid (H₃PO₄) catalyst.

(a) Any correct raw material (e.g., glucose, starch). (1 mark)
(b) CH₂=CH₂(g) + H₂O(g) → CH₃CH₂OH(g). (1 mark)
(c) High temperature (e.g., 300°C) / High pressure (e.g., 60-70 atm) / Phosphoric acid catalyst. (Any one) (1 mark)

18. Ethanoic acid reacts with potassium carbonate. (a) Write a balanced chemical equation for the reaction. (2 marks) (b) State one observation made during the reaction. (1 mark) (3 marks)

Show answer

Answer: (a) 2CH₃COOH(aq) + K₂CO₃(s) → 2CH₃COOK(aq) + H₂O(l) + CO₂(g) (b) Effervescence / Fizzing / Bubbling / Production of a colourless gas.

(a) Correct reactants and products (1 mark), correctly balanced (1 mark).
(b) Effervescence / Fizzing / Bubbling / Production of a colourless gas. (1 mark)

19. State two differences between soaps and detergents. (2 marks) (2 marks)

Show answer

Answer: 1. Soaps are generally biodegradable, whereas most synthetic detergents are non-biodegradable or slowly biodegradable. 2. Soaps form scum (insoluble precipitates) with hard water (due to reaction with Ca²⁺ and Mg²⁺ ions), while detergents do not form scum with hard water. 3. Soaps are salts of long-chain fatty acids (e.g., sodium stearate), whereas detergents are typically sodium salts of long-chain alkyl sulphates or alkylbenzene sulphonates. (Any two)

Soaps are biodegradable, detergents are not (or slowly). (1 mark)
Soaps form scum with hard water, detergents do not. (1 mark)

20. Explain why increasing the temperature usually increases the rate of a chemical reaction. (3 marks) (3 marks)

Show answer

Answer: Increasing the temperature increases the kinetic energy of the reactant particles. This leads to more frequent collisions between particles. More significantly, a higher proportion of these particles will possess kinetic energy equal to or greater than the activation energy. This results in an increased number of effective collisions per unit time, thereby speeding up the reaction rate.

Increases kinetic energy of particles / more frequent collisions. (1 mark)
More particles possess energy equal to or greater than activation energy. (1 mark)
Leads to more effective collisions. (1 mark)

21. Consider the following reversible reaction: N₂(g) + 3H₂(g) ⇌ 2NH₃(g) ; ΔH = -92 kJ/mol State and explain the effect of increasing pressure on the yield of ammonia. (3 marks) (3 marks)

Show answer

Answer: Increasing the pressure will increase the yield of ammonia. Explanation: According to Le Chatelier's Principle, when pressure is increased, the equilibrium will shift to the side with fewer moles of gaseous particles to alleviate the stress. In this reaction, there are 4 moles of gaseous reactants (1 mole N₂ + 3 moles H₂) and 2 moles of gaseous products (2 moles NH₃). Since the product side (ammonia) has fewer moles of gas, the equilibrium shifts to the right, favouring the formation of more ammonia.

Increases the yield of ammonia. (1 mark)
Equilibrium shifts to the side with fewer moles of gas to reduce pressure. (1 mark)
Reactant side has 4 moles (1+3), product side has 2 moles, so shifts to product side. (1 mark)

22. The equation below shows the combustion of methane: CH₄(g) + 2O₂(g) → CO₂(g) + 2H₂O(l) ; ΔH = -890 kJ/mol (a) Is this reaction endothermic or exothermic? (1 mark) (b) What is the significance of the negative sign in the enthalpy change? (1 mark) (c) Calculate the heat released when 8.0 g of methane is completely burned. (C=12, H=1) (1 mark) (3 marks)

Show answer

Answer: (a) Exothermic. (b) The negative sign indicates that heat is released from the system to the surroundings. (c) Molar mass of CH₄ = 12 + (1 × 4) = 16 g/mol. Moles of CH₄ = Mass / Molar mass = 8.0 g / 16 g/mol = 0.5 mol. From the equation, 1 mole of CH₄ releases 890 kJ of heat. Heat released by 0.5 mol = 0.5 mol × 890 kJ/mol = 445 kJ.

(a) Exothermic. (1 mark)
(b) Heat is released/given out. (1 mark)
(c) Moles of CH₄ = 0.5 mol. (0.5 mark)
Heat released = 445 kJ. (0.5 mark)

23. Using the reactivity series, explain why zinc can displace copper from copper (II) sulphate solution, but silver cannot. (3 marks) (3 marks)

Show answer

Answer: Zinc is more reactive than copper because it is higher in the reactivity series. This means zinc has a greater tendency to lose electrons and form positive ions than copper. Therefore, zinc atoms will donate electrons to copper (II) ions, displacing copper from its solution. Silver, on the other hand, is less reactive than copper (lower in the reactivity series). It has a lower tendency to lose electrons compared to copper and thus cannot displace copper from its salt solution.

Zinc is more reactive than copper / higher in reactivity series / loses electrons more readily. (1 mark)
Silver is less reactive than copper / lower in reactivity series / cannot lose electrons as readily. (1 mark)
Explains displacement based on relative tendency to lose electrons. (1 mark)

24. Aluminium is extracted from its ore by electrolysis. (a) Name the main ore from which aluminium is extracted. (1 mark) (b) Explain why cryolite is added to the molten ore during extraction. (2 marks) (3 marks)

Show answer

Answer: (a) Bauxite (Al₂O₃.nH₂O). (b) Cryolite (Na₃AlF₆) is added to aluminium oxide (alumina) for two main reasons: 1. To lower the melting point of alumina from about 2072 °C to around 950 °C, which significantly reduces the energy costs of the electrolysis. 2. To increase the electrical conductivity of the electrolyte, as pure molten alumina is a poor conductor.

(a) Bauxite. (1 mark)
(b) Lowers the melting point of alumina. (1 mark)
Increases electrical conductivity / reduces energy costs. (1 mark)

25. Name two gases that cause acid rain. (2 marks) (2 marks)

Show answer

Answer: 1. Sulphur dioxide (SO₂) 2. Nitrogen oxides (NOx, specifically nitrogen monoxide, NO, and nitrogen dioxide, NO₂)

Sulphur dioxide (SO₂). (1 mark)
Nitrogen oxides (NOx/NO/NO₂). (1 mark)

26. Describe how temporary hardness in water can be removed by boiling. (3 marks) (3 marks)

Show answer

Answer: Temporary hardness in water is caused by the presence of dissolved calcium hydrogencarbonate (Ca(HCO₃)₂) and magnesium hydrogencarbonate (Mg(HCO₃)₂). When this water is boiled, these soluble hydrogencarbonates decompose. They are converted into insoluble calcium carbonate (CaCO₃) and magnesium carbonate (MgCO₃), carbon dioxide, and water. The insoluble carbonates precipitate out as a solid (scale or fur), which can then be removed by filtration, thus softening the water. Equation: Ca(HCO₃)₂(aq) → CaCO₃(s) + H₂O(l) + CO₂(g)

Temporary hardness is due to soluble hydrogencarbonates of Ca and Mg. (1 mark)
Upon boiling, these decompose to insoluble carbonates. (1 mark)
The insoluble carbonates precipitate out and can be removed (e.g., by filtration). (1 mark)

27. You are provided with an unknown salt solution. Describe tests to confirm the presence of chloride ions and iron (III) ions in the solution. (4 marks) (4 marks)

Show answer

Answer: **Test for Chloride ions (Cl⁻):** 1. To a portion of the unknown solution, add a few drops of dilute nitric acid, followed by a few drops of silver nitrate solution. 2. Observation: A white precipitate (silver chloride) is formed. 3. Confirmation: Add aqueous ammonia to the precipitate. The white precipitate will dissolve, forming a clear solution. **Test for Iron (III) ions (Fe³⁺):** 1. To another portion of the unknown solution, add sodium hydroxide solution dropwise until in excess. 2. Observation: A reddish-brown precipitate (iron(III) hydroxide) is formed. 3. Confirmation: The reddish-brown precipitate is insoluble in excess sodium hydroxide solution. (Alternative for Fe³⁺: Add potassium thiocyanate solution. A blood-red solution is formed).

For Chloride ions:
- Test: Add dilute HNO₃ then AgNO₃ solution. (0.5 mark)
- Observation: White precipitate. (0.5 mark)
- Confirmation: Precipitate dissolves in aqueous ammonia. (1 mark)
For Iron (III) ions:
- Test: Add NaOH solution (or aqueous ammonia). (0.5 mark)
- Observation: Reddish-brown precipitate. (0.5 mark)
- Confirmation: Precipitate insoluble in excess NaOH (or aqueous ammonia). (1 mark)

28. 2.7g of aluminium powder was reacted with excess dilute hydrochloric acid. 2Al(s) + 6HCl(aq) → 2AlCl₃(aq) + 3H₂(g) Calculate: (a) The number of moles of aluminium reacted. (Al=27) (1 mark) (b) The volume of hydrogen gas produced at s.t.p. (Molar gas volume at s.t.p. = 22.4 dm³). (3 marks) (4 marks)

Show answer

Answer: (a) Moles of Aluminium (Al) reacted: Molar mass of Al = 27 g/mol Number of moles = Mass / Molar mass = 2.7 g / 27 g/mol = 0.1 mol. (b) Volume of hydrogen gas produced at s.t.p.: From the balanced chemical equation, the mole ratio of Al to H₂ is 2:3. If 2 moles of Al produce 3 moles of H₂, Then 0.1 mol of Al will produce (3/2) × 0.1 mol of H₂ = 0.15 mol of H₂. Volume of H₂ produced = Moles of H₂ × Molar gas volume at s.t.p. Volume of H₂ = 0.15 mol × 22.4 dm³/mol = 3.36 dm³.

(a) Moles of Al = 0.1 mol. (1 mark)
(b) Mole ratio Al:H₂ is 2:3. (1 mark)
Moles of H₂ produced = 0.15 mol. (1 mark)
Volume of H₂ = 3.36 dm³. (1 mark)

Practise online. Do this paper as a timed quiz with automatic marking on the interactive version, or read our revision guides.